RGB Laser ODL‑721
Laser-lit rear-projection video walls for 24/7 control rooms
- 2x more brightness than mainstream LED-lit rear-projection video walls
- 25% less power consumption at higher brightness levels
- More than 11 years of uninterrupted operation in 24/7 mode
- Unmatched colors, focus, and contrast levels
- Silent like never before (‘library’ noise level)
- Redundancy of critical components for ultimate peace of mind
- 50% setup-time reduction (motorized 7-axis alignment)
Powered with the latest laser technology, Barco's RGB laser rear-projection video walls delivers unseen brightness levels and vibrant colors, while offering a very low total cost of ownership (TCO). With its 10th generation of rear-projection video walls, Barco again raises the bar for critical infrastructure markets visualization.
Providing 2x more brightness than mainstream LED-lit rear-projection video walls, the RGB laser series take away all brightness issues of earlier video walls. Because the high luminance allows operating under daylight conditions, control rooms can finally light up - which improves operator working conditions! Adding vibrant colors to this mix, that make all nuances clearly distinguishable, you make sure nothing is wrongly interpreted and situational awareness is enhanced.
Over 11 years of uninterrupted 24/7 operations
With the RGB laser for 24/7 control rooms series, Barco takes another giant leap forward in terms of reliability. With a light source lifetime of at least 125,000 hours in both normal and eco-mode, and redundancy of all critical components (including power supply, inputs, and laser drivers), nothing is left to chance when it comes to uptime. Unlike technology used by competitors and in non-24/7 meeting rooms, Barco's RGB laser display series doesn't need a rotating color wheel to operate. Since each color can be uniquely controlled and is not dependent on the segment of a color wheel, it provides color control like never before and eliminates color breakup.
Automatic calibration and alignment
The engine of Barco’s RGB laser for 24/7 control rooms is fully motorized. Installers and maintenance staff will never need to open up the individual modules to perfectly align the individual cubes of the video wall. Using a web interface, the video wall can be remotely aligned by a single technician - including keystone correction. This is far more efficient, more reliable, and less time consuming, saving up to 50% of alignment and adjustments efforts. Combined with the Sense X automatic calibration system, continuously measuring and adjusting brightness and color levels over the complete video wall, users are sure the complete canvas is perfectly balanced at any time.
Specifications
Download spec sheetGeneral specifications
- Resolution
- Full HD (1920 x 1080 pixels)
- On-screen contrast
- 1800:1
- Screen
Screen type WV-FEL CSI Light source lifetime (hrs) Power usage (W) Boost 940 cd/m² 650 cd/m² 60,000 260 Normal 730 cd/m² 500 cd/m² 125,000 200 Eco 365 cd/m² 250 cd/m² 125,000 120 Mid gain type, 180° viewing angle - - - -
- Color
- Up to 170% REC709 color triangle
- Display technology
- Rear projection DLP
- White point
- Customized white points
- Screen gap
- Dependant on screen type
- Brightness uniformity
- Typ. >95% ANSI 9
Typ. >90% ANSI 13
- Dimensions
- • Diagonal: 70" (Approx.)
• Width: 1,550 mm | 61.02"
• Height: 872 mm | 34.33"
• Depth: 622 mm | 24.49"
• Weight: Projection Module: < 63 kg | 139 lbs
• Weight: Support frame: < 39 kg | 86 lbs
- Color stability
- Sense X automatic calibration
- Redundancy
- Redundant laser banks with redundant power supply drivers, input signal & external power supply
- Light source
- RGB lasers illumination (Lasers Class 1 RG2)
- AC input voltage
- 100 – 240 VAC, 50-60Hz
- Light source lifetime
- > 125,000 hrs in both Normal and Eco mode
- Noise Level
- Less than 20 dB (measured from 3 meters in front)
- Power
- 120W (eco)
200W (normal)
- Connectivity
- 2x DP1.2 inputs & 1x output (4K@60Hz)
2x HDMI 2.0 inputs (4K@60Hz)
2x USB ports (only for power)
2x Ethernet ports
- Conditions for operation
- 10°C-40°C | 50°F-104°F
Up to 80% humidity (non-condensing)
- Heat dissipation
- 390 BTU/h (eco)
680 BTU/h (typ)
860 BTU/h (max)
- Integration to third party equipment
- WEB service API
- HDCP
- 2.2 compliance
- Signal processing
- Loop through
Cropping, scaling with wall configuration
- Direct ethernet access
- Built in web server
- Graphical user interface
- All settings and operational parameters
- Warranty
- 2 years
- Notes
- (1) In general, rear projection video walls have no bezels, only a mechanical gap which depends on video wall configuration and operating temperatures
You can now find all media, brochures, presentations, whitepapers & marketing downloads in our new & improved download center
Visit Media CenterLooking for technical documents or product support?
For technical downloads such as drivers, firmware, manuals, drawings & documentation we would kindly like to direct you to our product support page.
Go to product support