Loki CinemaScope

Loki CinemaScope

Offering the same UHD enhancements as the Loki projector, coupled with a high-capacity 2.37:1 aspect DLP engine.

  • Theater & Media Room Series
  • 5K UHD Resolution (5,120 x 2,160)
  • Laser Phosphor  
  • Up to 7,800 ANSI Lumens
Loki CinemaScope's exceptional design allows a cinemascope film to be shown without requiring an anamorphic lens. The projector also provides Barco’s renowned single-step processing (SSPTM) and low latency scaling technologies.
 


Professional grade optics

 
By basing Loki CinemaScope on a proven optical architecture, custom designed aspherical glass elements and enhanced low dispersion glass lenses, image quality is in a class of its own. Contrast is not only increased, but the details within the darkest parts of the image are more visible.

CinemaScope

Our unique aspect ratio detection system, automatically crops and scales content to fit the appropriate screen area, ranging from 1.78:1 to 2.39:1. 

Manual cropping is also available for custom configurations such as cinemascope subtitle support, where only the top black bar is removed from none 1.78:1 content, preserving the subtitles at the foot of the image.

Laser light source

Outstanding image quality requires an exceptional light source, which is why Loki Cinemascope uses our  brand-new dual laser engine.  

Alongside significantly improved image uniformity, lasers last longer than traditional projector lamps, offer great image quality consistence over their lifetime, are less fragile and offer near instant on/off performance.  

Liquid cooling 

Loki Cinemascope has departed from a pure fan based cooling system, opting instead for a liquid cooling PID regulation system.  This combined with our simulation grade warp engine allows Balder to operate at any angle (free rotation), offering new possibilities when it comes to architectural integration.

General specifications
Type projector
Single chip DLP
Technologie
0.9" DMD™
Resolutie
5,120 x 2,160 (5K UHD)
Beeldverhouding
2.37:1 (CinemaScope)
Lichtbron
Laser phosphor
Levensduur lichtbron
20,000 - 60,000 hours
Laser intensity dependent
Lichtuitvoer
DCI (P3) Color Wheel: Up to 5,100 ANSI lumens
T Color Wheel: Up to 6,500 ANSI lumens
M Color Wheel: Up to 7,800 ANSI lumens
CLU (constante lichtuitvoer)
Yes
Contrastverhouding
1,800:1 Sequential
450:1 ANSI
Helderheidsuniformiteit
>90%
Lensbereik
(R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1) *
(R9802241) - EN61 (1.70 - 2.50:1) *
(R9801211) - EN44 (2.50 - 4.60:1)

* Standard Lens Option(s)
Optische lensverschuiving

Up to 122% vertical lens shift & up to 40% horizontal lens shift (depending on lens selection)

Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here
Optische dowser
Yes
Kleurcorrectie
P7 RealColor™
Kleurenspectrum
DCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709
Beeldverwerking
Embedded Warp & Blend Engine
WARP
4-Corner Warp & Bow Correction via Warp Engine
Oriëntatie
360° Rotation
Netwerkverbinding
10/100 Ethernet via RJ45 connection
Geïntegreerde webserver
Yes
Diagnose
via Prospector web interface
HDR
HDR10
3D
Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details
Ingangen
1 x HDMI 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)
Invoerresoluties
From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz
Latentie
TBD
Controle
IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.
Voedingsvereisten
100 - 240V / 50 - 60Hz
US Requires: 20A Service (NEMA 5-20P Plug Type
Energieverbruik
2180 W - Maximum
BTU/uur
Max. 6,000 BTU/h
Stroom in stand-by
Standby ECO Mode:
110v - 0.78W (with LAN Connection)
230v - 0.87W (with LAN Connection)
Geluidsniveau (standaard bij 25°C/77°F)
38 dB(A)
Bedrijfstemperatuur
10 to 45 °C at Sea Level
Optimal Set Point: 20 °C
Operationele vochtigheid
20 to 80% (relative humidity)
Luchtstroomvereisten
Air Inlet (from Rear w/Feet Down):  Right Side
Exhaust (from Rear w/Feet Down):  Rear Clearance Requirements:
Front: 1cm
Left: 1cm
Right: 50cm
Rear: 100cm
Top: 1cm
Luchtuitstroom
193 ft3/min @ 25 °C
327 m3/hour @ 25 °C
Download Lens & Airflow Data Here
Afmetingen (B x L x H)
Excluding Lens
577 x 738 x 304 mm
22.7 x 29.1 x 12 in.
Gewicht
Excluding Lens
44.5 kg / 98.1 lbs
Verzendingsafmetingen
Excluding Lens
720 x 910 x 630 mm
28.4 x 35.8 x 24.8 in.
Verzendgewicht
Excluding Lens
55kg / 121.3 lbs
Opslagtemperatuur
-20 to 60 °C
Vochtigheid bij opslag
10 to 90% (relative humidity)
Standaardaccessoires
Power Cord, Remote Control
24/7 operation
This projector is designed and warranted for heavy duty 24/7 operation.
Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications.
Certificeringen
CE, FCC Class A and cCSAus
Veiligheidsvereisten
This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 3.15 is installed. For Northern America, installation requirements according to Risk group 3 (RG3) must be followed when interchangeable lens with throw ratio greater than 2.33 is installed. Refer to the installation manual for further information.
Garantie
Limited 3 years parts and labor
Extendable up to 5 years
*
Firmware upgradable
Please contact an authorized Barco representative for details

U kunt nu alle media, brochures, presentaties, papers en marketingdownloads in ons nieuwe en verbeterde downloadcentrum terugvinden

Bezoek het mediacentrum

Op zoek naar technische documenten of productondersteuning?

Voor technische downloads zoals drivers, firmware, handleidingen, tekeningen & documentatie verwijzen wij u graag door naar onze productondersteuningspagina.

Ga naar productondersteuning