Balder CinemaScope

Especificações gerais

Tipo de projetor

Single chip DLP

Tecnologia

0.9" DMD™

Resolução

5,120 x 2,160 (5K UHD)

Relação de aspecto

2.37:1 (CinemaScope)

Fonte de luz

Laser phosphor

Vida útil da fonte de luz

20,000 - 60,000 hours
Laser intensity dependent

Saída de luz

DCI (P3) Color Wheel: Up to 3,600 ANSI lumens
T Color Wheel: Up to 4,000 ANSI lumens
M Color Wheel: Up to 5,600 ANSI lumens

CLO (saída de luz constante)

Yes

Razão de contraste

1,800:1 Sequential
450:1 ANSI

Uniformidade de brilho

>90%

Faixa de alcance da lente

(R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1) *
(R9802241) - EN61 (1.70 - 2.50:1) *
(R9801211) - EN44 (2.50 - 4.60:1)

* Standard Lens Option(s)

Deslocamento ótico de lente

Up to 122% vertical lens shift & up to 40% horizontal lens shift (depending on lens selection)

Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here

Obturador ótico

Yes

Correção de cores

P7 RealColor™

Gama de cores

DCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709

Processamento de imagens

Embedded Warp & Blend Engine

WARP

4-Corner Warp & Bow Correction via Warp Engine

Orientação

360° Rotation

Conexão de rede

10/100 Ethernet via RJ45 connection

Servidor da Web integrado

Yes

Diagnóstico

via Prospector web interface

HDR

HDR10

3D

Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details

Entradas

1 x HDMI^TM 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)

Resoluções de entrada

From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz

Latência

TBD

Controle

IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.

Requisitos de energia

100 - 240V / 50 - 60Hz

Consumo de energia

1,100 W - Max.

Alimentação de standby

Standby ECO Mode:
110v - 0.73W (with LAN Connection)
230v - 0.82W (with LAN Connection)

BTU por hora

4,000 BTU/h - Max.

Nível de ruído (normal a 25 °C/77 °F)

36 dB(A)

Temperatura de operação

10 to 45 °C at Sea Level
Optimal Set Point: 20 °C

Umidade de operação

20 to 80% (relative humidity)

Requisitos de fluxo de ar

Air Inlet (from Rear w/Feet Down):  Right Side
Exhaust (from Rear w/Feet Down):  Rear Clearance Requirements:
Front: 1cm
Left: 1cm
Right: 50cm
Rear: 100cm
Top: 1cm

Fluxo de ar de exaustão

112 ft³/min @ 25 °C
190 m³/hour @ 25 °C
Download Lens & Airflow Data Here

Dimensões (LxPxA)

Excluding Lens
475 x 588 x 286 mm
18.7 x 23.1 x 11.3 in.

Peso

Excluding Lens
37 kg / 81.5 lbs

Dimensões da Remessa

Excluding Lens
730 x 600 x 480 mm
28.7 x 23.7 x 18.9 in.

Peso de expedição

Excluding Lens
43 kg / 94.8 lbs

Acessórios padrão

Power Cord, Remote Control

Certificações

CE, FCC Class A and cCSAus

Requisitos de segurança

This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 6.0 is installed. Refer to the installation manual for further information.

24/7 operation

This projector is designed and warranted for heavy duty 24/7 operation.
Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications.

Garantia

Limited 3 years parts and labor
Extendable up to 5 years

*

Firmware upgradable
Please contact an authorized Barco representative for details