Medea

Especificações gerais

Tipo de projetor

Single chip DLP

Tecnologia

0.66" DMD™

Resolução

3,840 x 2,160 (4K UHD)

Relação de aspecto

1.78:1 (16:9)

Fonte de luz

Laser phosphor

Vida útil da fonte de luz

40,000hrs in Long Life Mode
20,000hrs in Normal Mode
12,000hrs in Silent Mode
12,000hrs in High Brightness Mode

Saída de luz

Up to 6,500 ANSI lumens

CLO (saída de luz constante)

Yes

Razão de contraste

1,300:1 Sequential
350:1 ANSI

Uniformidade de brilho

>85%

Faixa de alcance da lente

(R98017241) - GLD (0.80 - 1.00:1)
(R98017221) - GLD (1.00 - 1.35:1)
(R98017201) - GLD (1.35 - 2.00:1) *
(R98017191) - GLD (1.35 - 2.00:1) - Manual Zoom & Focus **
(R98017211) - GLD (2.00 - 3.00:1)

NOTE: The below lens options require an EN Series lens adapter (R9801442)
(R9801832) - FLDX UST (0.54:1) - 90° lens
(R9802244) - EN67 (0.86:1)
(R9802243) - EN66 (1.06 - 1.60:1)
(R9802003) - EN76 (1.26 - 1.72:1)
(R9802242) - EN63 (1.58 - 2.25:1)
(R9802241) - EN61 (2.25 - 3.31:1)
(R9801211) - EN44 (3.30 - 6.08:1)

* Standard Lens Option(s) - USA
** Standard Lens Option(s) - Rest of World

Deslocamento ótico de lente

GLD Series Lens Options
Up to 60% vertical lens shift & up to 18% horizontal lens shift (depending on lens selection) EN Series Lens Options
Up to 67% vertical lens shift & up to 18% horizontal lens shift (depending on lens selection) Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here

Obturador ótico

Yes

Correção de cores

P7 RealColor™

Gama de cores

REC.709

Processamento de imagens

Embedded Warp & Blend Engine

WARP

4-Corner Warp & Bow Correction via Warp Engine

Orientação

360° Rotation

Conexão de rede

10/100 Ethernet via RJ45 connection

Servidor da Web integrado

Yes

Diagnóstico

via Prospector web interface

HDR

HDR10

3D

Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details

Entradas

1 x HDMI 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)

Resoluções de entrada

From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz

Latência

TBD

Controle

IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.

Requisitos de energia

100 - 240V / 50 - 60Hz
US Requires: 20A Service (NEMA 5-20P Plug Type)

Consumo de energia

850 W maximum

BTU por hora

2,900 BTU/h maximum

Nível de ruído (normal a 25 °C/77 °F)

35 dB(A)

Temperatura de operação

10 to 45 °C at Sea Level
Optimal Set Point: 20 °C

Umidade de operação

20 to 80% (relative humidity)

Requisitos de fluxo de ar

Air Inlet (from Rear w/Feet Down):  Left Side
Exhaust (from Rear w/Feet Down):  Right Side Clearance Requirements:
Front: 1cm
Left: 50cm
Right: 80cm
Rear: 20cm
Top: 1cm

Fluxo de ar de exaustão

221 ft³/min @ 22.9 °C
375 m³/hour @ 22.9 °C
Download Lens & Airflow Data Here

Dimensões (LxPxA)

Excluding Lens
481 x 680 x 239 mm
18.9 x 26.8 x 9.4 in.

Peso

Excluding Lens
25.5 kg / 56.2 lbs

Dimensões da Remessa (L x C x A)

Excluding Lens
920 x 700 x 700 mm
36 x 27 x 27 in.

Peso de expedição

Excluding Lens
42 kg / 92 lbs

Acessórios

Power Cord, Remote Control

Certificações

CE, FCC Class A and cCSAus

Requisitos de segurança

This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 3.5 is installed.<\p> Refer to the installation manual for further information.

Garantia

Limited 3 years parts and labor
Extendable up to 5 years

*

Firmware upgradable
Please contact an authorized Barco representative for details