Wired RoomDock is a feature of the CX-50 Gen2 where the user can share high resolution and frame rate content and connect to the room audio and video over a wired connection.
Note: Wired RoomDock feature is also supported with the ClickShare Bar. For details, see KB 11932.
Connection setup overview
- One or two screens
- No ClickShare specific drivers or app’s need to be installed
To start using Wired RoomDock, connect the USB Type-C™ port from your laptop to the front USB Type-C™ port of the Base Unit.
If your laptop USB Type-C™ port does NOT support display port alternate mode, you can also use the USB Type-C™ port on the Barco HDMI™-in to Type-C converter kit (R9861581), for details see KB 7199.
Tip! For information about the cable type used with Wired RoomDock, see, KB 6726.
Before Wired RoomDock can be used, it must be configure it in the Base Unit Configurator (Display & Audio > Input). For more information please check the installation manual .
