Продукты
Продукты

Is CEC supported on ClickShare Base Units?

Артикул: [4084] - Устаревший код: [5175]

Применимо к

Yes, CEC (Consumer Electronics Control) is supported on the ClickShare CSE-200+, CX-series, and C-series Base Units, as well as the ClickShare CB Core/Pro. 

CEC is a feature of HDMI™ that allows users to command and control devices connected through HDMI using only one remote control. It is not supported on the DisplayPort connections.

What CEC actions are implemented?

On the HDMI output:

  1. When turning the Display OFF,  the ClickShare Base Unit will go to Eco Standby.
  2. When turning the Display ON,  the ClickShare Base Unit will turn ON, when it's connected to the active input of the display
  3. When the ClickShare Base Unit receives a wake up, the Display will turn ON / Switch to the HDMI port  connected.
  4. When selecting the HDMI input, connected to the ClickShare Base Unit, on the Display, the ClickShare Base Unit will resume.

On the HDMI input:

  1. When the ClickShare Base Unit is turned OFF, the Input device will turn OFF.
  2. When the Input device is turned ON, the ClickShare Base Unit  will turn ON.

 

How to enable CEC?

On the HDMI output:
CEC can be enabled (or disabled) in the ClickShare Configurator: Display & Audio > Outputs.

kb4084_cec_enable.jpg
 

On the HDMI input:
When a HDMI input is available on the ClickShare Base Unit, CEC is enabled by default.>

 

Info! There is NO CEC support when using the DP connectivity.

Свойства

Последнее обновление 17 мая 2024 г.