One of the most powerful and anticipated features of ClickShare models, are the predefined security levels. Now administrators can just select one of the three available levels, depending on the security requirements of their organization. There’s no need to do this configuration manually anymore: just select the right level and you’re done!
By default, security level 1 is activated.
Info! Changing the security level will require a re-pairing of the Buttons.
Changing the security level from 1 to a higher level will change the compatibility setting for Buttons with certificate (R9861006D01). They cannot re-pair as long as the security setting is higher than level 1.
Changing the security level from 1 to a higher level will change the compatibility setting for Buttons with certificate (R9861006D01). They cannot re-pair as long as the security setting is higher than level 1.
Info! Setting a new security level on the Base Unit will restore the Base Unit's SSID broadcast function. This is evidenced by the SSID broadcast checkbox being activated on the Wi-Fi Settings page.
It is expected behaviour - All the preset security levels have SSID broadcast enabled. You can set a security level and hide the SSID after.
It is expected behaviour - All the preset security levels have SSID broadcast enabled. You can set a security level and hide the SSID after.
How to set the security level?
- Log in to the ClickShare Configurator of your Base Unit (how to: see KB 2324).
- Go to Security > Security Level and select the desired security level icon.
- Click Save Changes.
For detailed information on different security levels with ClickShare, see the chapter Security, security level in your ClickShare Base Unit installation manual (how to: see KB 9362).
Refer to the video tutorials below for instructions on setting up security levels for your ClickShare Base Unit.
ClickShare (CX/C-series) models
ClickShare (CS/CSE-series) models
