Produkte

When using the HDMI™ input on the CX-50 in standby mode, the HDMI™ input is not visible on the screen

Artikelnummer: [4797] - Legacy-Code: [11516]

Gilt für

Issue:

On the CX-50, using the HDMI™ input after the Base Unit goes into standby results in the HDMI™ input not appearing on the screen.

This issue is only noticed with the ClickShare CX-50 Base Unit.

Solution:

Upgrading your ClickShare Base Unit to firmware version 2.13 or higher will fix this issue.

Eigenschaften

Zuletzt aktualisiert 21.05.2024