INOGENI & ClickShare

INOGENI Room Solutions for Barco ClickShare Conference

Add complete BYOM capabilities by integrating TOGGLE with your Barco and videoconference system (CX-20, CX-30, CX-50).

Adding the AV-Awards-winning TOGGLE will enable free switching to BYOM meetings from the videoconferencing system. The TOGGLE can also increase the number of cameras (with the SHARE2U mixer or the CAM230 or CAM300 video cameras selector) or other active USB devices (speakerphone, or conferencing video Bar) for a more engaged BYOM/BYOD experience. All INOGENI Capture cards (HDMI to USB or SDI to USB as well as our U-BRIDGE USB 2 Extender (up to 100 meter) are all compatible without drivers.

In the spotlight

MULTI CAMERA MIXERS: SHARE2, SHARE2U, CAM230 and CAM300 optimizes your ClickShare conference by enabling video with audio capture from up to four HDMI and USB camera sources. It features an easy and intuitive switcher/mixer control with picture-in-picture and split-functions. Less hardware complexity. No drivers, no setup for your Barco ClickShare!

4K2USB3, 4KXUSB3 and HD2USB3: HDMI to USB 3.0 Capture Cards expands your ClickShare versatility and requires no drivers. It is the most reliable and convenient tool to capture uncompressed video from your HDMI Camera with audio to your ClickShare Conference device. The 4KX-PLUS unlock BYOM/BYOD third-party meetings on Cisco-Webex equipment.

The TOGGLE switch of 3 USB devices with 2 PC hosts, allows (cameras, microphones) in mere seconds. The SDI2USB3 – SDI to USB 3.0 capture card is the easiest and most reliable tool to capture uncompressed 3GSDI video with embedded audio to your ClickShare Conference device. No driver installation.

Validated peripherals

Device Peripheral
firmware
ClickShare
conference firmware
Solution
area
Type Interoperability
4K2USB3 8.85 02.20 Room Devices USB-Adapter/Processor Compatible
4KX-PLUS 1.86 02.21 Room Devices USB-Adapter/Processor Compatible
4KXUSB3 1.86 02.21 Room Devices USB-Adapter/Processor Compatible
CAM230 2.8 02.21 Room Devices USB-Adapter/Processor Compatible
CAM300 1.15.1 02.21 Room Devices USB-Adapter/Processor Compatible
HD2USB3 8.85 02.21 Room Devices USB-Adapter/Processor Compatible
SDI2USB3 8.84 02.21 Room Devices USB-Adapter/Processor Compatible
SHARE2 1.70 02.21 Room Devices USB-Adapter/Processor Compatible
SHARE2U 1.15.1 02.21 Room Devices USB-Adapter/Processor Compatible
TOGGLE 1.3 02.21 Room Devices USB-Hub/Switch/Extender Compatible
TOGGLE ROOMS 1.24 02.21 Room Devices USB-Hub/Switch/Extender Compatible
TOGGLE ROOMS XT 0.1 02.21 Room Devices USB-Hub/Switch/Extender Compatible
U-CAM 2.8 02.21 Room Devices USB-Adapter/Processor Compatible

Company Profile

“Bring your own device,” aka BYOD, has become more than a trend in hybrid workplaces, it's the new reality around the globe. INOGENI products combine with BARCO ClickShare Conference to enable a better immersive conferencing experience.

With INOGENI products, anyone can connect easily and quickly with all the conferencing equipment in a room and control it: multiple cameras, conference system video and audio sources to the wireless ClickShare Conference System.

Less hardware complexity. No drivers, no setup! INOGENI comes with simple solutions that connect all cameras (HDMI, SDI, USB 2&3, etc.) with the BARCO ClickShare Conference. World wide distribution.

Contact INOGENI

Inogeni

1045 Wilfrid-Pelletier Avenue, Suite 101

Québec City, QC, G1W 0C6, CANADA

 

Disclaimer: The information shown is provided by our alliance partner and featured as such. Barco does not take any liability or responsibility for the content.

Ready to upgrade your meeting room? Not sure where to start?