Loki CinemaScope

Offering the same UHD enhancements as the Loki projector, coupled with a high-capacity 2.37:1 aspect DLP engine.

Theater & Media Room Series
5K UHD Resolution (5,120 x 2,160)
Laser Phosphor
Up to 7,800 ANSI Lumens

Loki CinemaScope's exceptional design allows a cinemascope film to be shown without requiring an anamorphic lens. The projector also provides Barco’s renowned single-step processing (SSPTM) and low latency scaling technologies.

Professional grade optics

By basing Loki CinemaScope on a proven optical architecture, custom designed aspherical glass elements and enhanced low dispersion glass lenses, image quality is in a class of its own. Contrast is not only increased, but the details within the darkest parts of the image are more visible.

CinemaScope

Our unique aspect ratio detection system, automatically crops and scales content to fit the appropriate screen area, ranging from 1.78:1 to 2.39:1.

Manual cropping is also available for custom configurations such as cinemascope subtitle support, where only the top black bar is removed from none 1.78:1 content, preserving the subtitles at the foot of the image.

Laser light source

Outstanding image quality requires an exceptional light source, which is why Loki Cinemascope uses our brand-new dual laser engine.

Alongside significantly improved image uniformity, lasers last longer than traditional projector lamps, offer great image quality consistence over their lifetime, are less fragile and offer near instant on/off performance.

Liquid cooling

Loki Cinemascope has departed from a pure fan based cooling system, opting instead for a liquid cooling PID regulation system. This combined with our simulation grade warp engine allows Balder to operate at any angle (free rotation), offering new possibilities when it comes to architectural integration.

Especificaciones

Descargar hoja de especificaciones

Especificaciones generales

Tipo de proyector: Single chip DLP

tecnología: 0.9" DMD™

resolución: 5,120 x 2,160 (5K UHD)

Relación de aspecto: 2.37:1 (CinemaScope)

Fuente de luz: Laser phosphor

Vida útil de la fuente de luz: 20,000 - 60,000 hours
Laser intensity dependent

Salida de luz: DCI (P3) Color Wheel: Up to 5,100 ANSI lumens
T Color Wheel: Up to 6,500 ANSI lumens
M Color Wheel: Up to 7,800 ANSI lumens

CLO (emisión constante de luz): Yes

relación de contraste: 1,800:1 Sequential
450:1 ANSI

brillo uniforme: >90%

Rango de objetivos: (R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1) *
(R9802241) - EN61 (1.70 - 2.50:1) *
(R9801211) - EN44 (2.50 - 4.60:1)

* Standard Lens Option(s)

Cambio de objetivo de la lente: Up to 122% vertical lens shift & up to 40% horizontal lens shift (depending on lens selection)
Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here

Obturador óptico: Yes

Corrección del color: P7 RealColor™

Gama de colores: DCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709

Procesamiento de imágenes: Embedded Warp & Blend Engine

WARP: 4-Corner Warp & Bow Correction via Warp Engine

Orientación: 360° Rotation

conexión de red: 10/100 Ethernet via RJ45 connection

Servidor web integrado: Yes

Diagnósticos: via Prospector web interface

HDR: HDR10

3D: Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details

entradas: 1 x HDMI 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)

Resoluciones de entrada: From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz

Latencia: TBD

Control: IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.

Requisitos de alimentación: 100 - 240V / 50 - 60Hz
US Requires: 20A Service (NEMA 5-20P Plug Type

consumo de potencia: 2180 W - Maximum

BTU por hora: Max. 6,000 BTU/h

Modo de espera: Standby ECO Mode:
110v - 0.78W (with LAN Connection)
230v - 0.87W (with LAN Connection)

Nivel de ruido (típico a 25 °C/77 °F): 38 dB(A)

Temperatura operativa: 10 to 45 °C at Sea Level
Optimal Set Point: 20 °C

Humedad operativa: 20 to 80% (relative humidity)

Requisitos de flujo de aire: Air Inlet (from Rear w/Feet Down): Right Side
Exhaust (from Rear w/Feet Down): Rear Clearance Requirements:
Front: 1cm
Left: 1cm
Right: 50cm
Rear: 100cm
Top: 1cm

Flujo de aire de escape: 193 ft³/min @ 25 °C
327 m³/hour @ 25 °C
Download Lens & Airflow Data Here

dimensiones (ancho x largo x alto): Excluding Lens
577 x 738 x 304 mm
22.7 x 29.1 x 12 in.

peso: Excluding Lens
44.5 kg / 98.1 lbs

Dimensiones de embalaje: Excluding Lens
720 x 910 x 630 mm
28.4 x 35.8 x 24.8 in.

Peso del paquete de envío: Excluding Lens
55kg / 121.3 lbs

Temperatura de almacenamiento: -20 to 60 °C

humedad de almacenaje: 10 to 90% (relative humidity)

Accesorios estándar: Power Cord, Remote Control

24/7 operation: This projector is designed and warranted for heavy duty 24/7 operation.
Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications.

Certificaciones: CE, FCC Class A and cCSAus

Requisitos de seguridad: This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 3.15 is installed. For Northern America, installation requirements according to Risk group 3 (RG3) must be followed when interchangeable lens with throw ratio greater than 2.33 is installed. Refer to the installation manual for further information.

Garantía: Limited 3 years parts and labor
Extendable up to 5 years

*: Firmware upgradable
Please contact an authorized Barco representative for details

En nuestro nuevo y mejorado centro de descargas encontrará todo el material multimedia, de marketing, folletos, presentaciones y notas del producto.

Visite el centro multimedia

¿Busca documentos técnicos o soporte de productos?

Para descargas de tipo técnico, como controladores, firmware, manuales, imágenes y documentación, le rogamos que se dirija a nuestra página de soporte del producto.

Ir a soporte de productos

Loki CinemaScope

Loki CinemaScope

Professional grade optics

CinemaScope

Laser light source

Liquid cooling

Especificaciones

Especificaciones generales

Material de marketing

¿Busca documentos técnicos o soporte de productos?