For firmware 02.14 up to 02.16, the signage content on 2 displays is observed to occur in 2 situations:
- The resolution and/or aspect ratio of the 2 displays are different
- There is a time delay in rendering the content on the 2 displays
1. The resolution and/or aspect ratio of the 2 displays are different
When the resolution and/or aspect ratio of the 2 displays are different, the content on both screens can differ when the content does not scale automatically to match the display resolution and aspect ratio.This can happen both in Extended and in Clone mode.
2. There is a time delay in rendering the content on the 2 displays
The signage content on the 2 displays are not synchronized. This means that the content of the 2 displays may get out of sync after a while.A possible workaround is to reboot the Base Unit.
Barco is committed to improve this behavior in one of the next releases.