Produits

How to use ClickShare (C or CX) for wireless presentation with Poly Studio X videobars

Numéro de l'article: [9568]

Applicable à

This article provides information on the configuration of ClickShare Present (C-5/10) or ClickShare Conference (CX-20/30/50) with Poly Studio (X30, X50/X52, X70 or G7500) for wireless presentation.

Remark: The main goal of this article is to provide recommended set ups and use cases. Please refer to specific product documentation (installation and reference manuals, spec sheets, etc.) for specific product information, e.g. wiring, specific port functions and supported features and limitations.

Recommended for environments where:

  • users already leverage ClickShare for local wireless content sharing and want to have the same easy-to-use experience for remote meetings
  • users need to share content side-by-side in remote meetings
  • users want to have a very simple wireless content sharing experience for local meetings (without having to start a UC meeting)
  • In general, where users struggle to share content (for local and remote meetings) in setups with room systems

5652_01.png

How to setup this configuration:

  • Connect C-5/C-10, CX-20/CX-30/CX-50 HDMI™ Out to Poly Studio X videobars HDMI™ In
  • Connect Poly Studio videobars HDMI™ to one or two displays.
    Support for dual display depends on the Poly model and the UC (MS Teams or other) license.
  • Connect Poly Studio videobars and ClickShare to the network

 

Info! Since every Poly Studio X videobar is different, please check in the installation manual for the exact ports to connect to. This is an example for the Poly X52:

kb9568.png

 

ClickShare configuration

See the ClickShare AV Integration Whitepaper for further instructions on how to deploy the best experience. The main recommendation is to configure a Eco Standby time (not deep standby) and disable the “Show the wallpaper when no one is sharing their screen” so that only content is shown when someone is sharing

kb9568_wallpaper.png

Also make sure that on C/CX audio over HDMI™ is enabled in the “Display & Audio – Outputs” setting page in the WebUI (similar in XMS Cloud).

kb9568_webui_hdmi_enabled.png 


In general, make sure that the ClickShare device is up to date and install the corresponding firmware on the Poly device to the matching version as published on the Barco website: https://www.barco.com/en/products/clickshare-conferencing-collaboration/alliance-partners/peripherals?partner=Poly&recent=true for specific product-related remarks
 

Poly Studio X videobars configuration
 

The Poly Studio X videobars will be set up in Appliance Mode with any room application (Poly, MTR, etc.) that supports the HDMI™ input. Some of the room apps also support audio over HDMI™ while others do not allow this. Please check with Poly what level of support is provided.

Switching to device mode is not supported in this setup as the ClickShare will be used as a pure HDMI™ input to the Poly Studio X videobars. Therefore, disable the “Enable Device mode” inside the Poly settings.

After this setup and configuration, users can now:

  • Wirelessly connect to ClickShare with the Button or the ClickShare App
  • Wirelessly share content (screen or app) including audio from any laptop or BYOD (phone or tablet) using ClickShare apps and/or native protocols (AirPlay, Google Cast or Miracast)
  • On ClickShare models (all except C-5 and CX-20) where multiple users can share content side-side, this is now possible in both local and remote meetings
  • When the user started a remote meeting on the Poly Studio X videobar, this content will be forwarded to the remote users via the Room App on the Poly Studio X videobar
  • If the room is equipped with a touch display and the user wants to use ClickShare blackboard, annotation and touch back (to the laptop), make sure the USB of the touch display is directly connected to ClickShare
    Note: when enabling this, it is not possible anymore to control Poly Studio X videobar from the touch display.

Remarks:

  • For automatic sharing must (1) be supported by the MTR Application running on the bar and (2) be activated in the MTR settings. Otherwise, select the share function on the Poly Studio X videobars controller to get the content from the ClickShare even when the button or App is already sharing. The detection happens on discovery of a new HDMI™ connection, important to have a Eco standby time set and disable the show wallpaper for this functionality.
  • Some UC Room Apps do not support audio. In that case only video is presented.
  • While this scenario is supported by the C-5/C-10, users might consider using a CX if they consider adding BYOM at a later point in time
  • Some UC applications will allow support for another UC service (e.g. Microsoft “Direct Join”) but with limited capabilities, e.g. no content sharing which might confuse users when e.g. ClickShare is used for wireless presentation. In those case, the use case “agnostic wireless conferencing to the Poly Studio X videobars"  might be a better fit.
Known issues
  • When initially sharing audio via HDMI™, the volume level on the Poly Studio X videobar is very low. As soon as the volume level is changed in the Poly Studio X videobar, it goes to normal level.
  • For other known issues and an overview of different configurations for ClickShare Conference with PolyStudio, see KB 5652.

Propriétés

Dernière mise à jour 19 avr. 2024