Balder CinemaScope

Specifiche generali

Tipo di proiettore

Single chip DLP

Tecnologia

0.9" DMD™

Risoluzione

5,120 x 2,160 (5K UHD)

Proporzioni

2.37:1 (CinemaScope)

Sorgente luminosa

Laser phosphor

Durata sorgente luminosa

20,000 - 60,000 hours
Laser intensity dependent

Emissione luminosa

DCI (P3) Color Wheel: Up to 3,600 ANSI lumens
T Color Wheel: Up to 4,000 ANSI lumens
M Color Wheel: Up to 5,600 ANSI lumens

CLO (Constant Light Output)

Yes

Rapporto di contrasto

1,800:1 Sequential
450:1 ANSI

Uniformità della luminosità

>90%

Intervallo obiettivo

(R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1) *
(R9802241) - EN61 (1.70 - 2.50:1) *
(R9801211) - EN44 (2.50 - 4.60:1)

* Standard Lens Option(s)

Spostamento obiettivo ottico

Up to 122% vertical lens shift & up to 40% horizontal lens shift (depending on lens selection)

Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here

Schermo paraluce ottico

Yes

Correzione del colore

P7 RealColor™

Gamma di colori

DCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709

Elaborazione delle immagini

Embedded Warp & Blend Engine

WARP

4-Corner Warp & Bow Correction via Warp Engine

Orientazione

360° Rotation

Connessione in rete

10/100 Ethernet via RJ45 connection

Server web integrato

Yes

Diagnostica

via Prospector web interface

HDR

HDR10

3D

Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details

Ingressi

1 x HDMI^TM 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)

Risoluzioni in ingresso

From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz

Latenza

TBD

Controllo

IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.

Requisiti di alimentazione

100 - 240V / 50 - 60Hz

Consumo energetico

1,100 W - Max.

Standby alimentazione

Standby ECO Mode:
110v - 0.73W (with LAN Connection)
230v - 0.82W (with LAN Connection)

BTU per ora

4,000 BTU/h - Max.

Livello di rumore (tipico a 25°C/77°F)

36 dB(A)

Intervallo temperature in funzionamento

10 to 45 °C at Sea Level
Optimal Set Point: 20 °C

Umidità in funzionamento

20 to 80% (relative humidity)

Requisiti per flusso d’aria

Air Inlet (from Rear w/Feet Down):  Right Side
Exhaust (from Rear w/Feet Down):  Rear Clearance Requirements:
Front: 1cm
Left: 1cm
Right: 50cm
Rear: 100cm
Top: 1cm

Ventilazione di scarico

112 ft³/min @ 25 °C
190 m³/hour @ 25 °C
Download Lens & Airflow Data Here

Dimensioni (PXLXA)

Excluding Lens
475 x 588 x 286 mm
18.7 x 23.1 x 11.3 in.

Peso

Excluding Lens
37 kg / 81.5 lbs

Dimensioni con imballo

Excluding Lens
730 x 600 x 480 mm
28.7 x 23.7 x 18.9 in.

Peso con imballo

Excluding Lens
43 kg / 94.8 lbs

Accessori standard

Power Cord, Remote Control

Certificazioni

CE, FCC Class A and cCSAus

Requisiti di sicurezza

This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 6.0 is installed. Refer to the installation manual for further information.

24/7 operation

This projector is designed and warranted for heavy duty 24/7 operation.
Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications.

Garanzia

Limited 3 years parts and labor
Extendable up to 5 years

*

Firmware upgradable
Please contact an authorized Barco representative for details