The pincode for an additional client authentication can be activated on the Base Unit. Every time such a client connects to the Base Unit, a passcode will be generated by a random number generator in the Base Unit and be displayed on the screen.
This can be activated in the ClickShare WebUI under Wi-Fi & Network > Services. The pincode can be selected for the ClickShare App and all BYOD screen sharing protocols except Google Cast.
For more detailed information please refer to your respective Base Unit installation manual (how to: see KB9362).
Where can I view the pincode on the screen for ClickShare
- For ClickShare devices (CX-20/30/50 and C-5-10) running firmware version 2.16 and higher, the pincode will appear in large font in the middle of the screen.
- For ClickShare devices (CX-20/30/50 and C-5-10) running firmware version below 2.16, the pincode will appear in the center-bottom of the screen.
- For ClickShare devices (CS-100(H) and CSE-200/200+/800) running any firmware version, the pincode will appear in the top-right of the screen.